Customize program cycles, Pre-set program cycle – Honeywell 17005 User Manual

Page 6

Advertising
background image

NOTE:

The air cleaner cannot be programmed unless it is plugged into the outlet.

To SET program points:
Press the SET button and hold for 3 seconds to activate time function. The SET

button will move through these programming functions:
Set (current) TIME.
Set PG1 cycle times P1-ON and P1-OFF.
Set PG2 cycle times P1-ON and P1-OFF, and P2-ON and P2-OFF.
Set EXIT mode and Run the clock.

To Customize the PG1 Program Settings to run

ONE

ON/OFF Cycle in a 24 hour

period:

NOTE: You are unable to set the OFF time to be the same as the ON time.

• Press the SET button and hold for 3 seconds to activate time function. Move

through programming functions by repeatedly pressing SET button until PG1 and
P1-ON appear. The clock and program speed icons will appear (Fig. 4a).

• Adjust the time using the hours and minutes button (up for hours, down for

minutes). This is the time that the machine will turn ON.

• Adjust the desired speed setting using the SPEED button.
• Press the SET button until PG1 and P1-OFF appear. The speed icon will disappear

(Fig. 4b).

• Adjust the time using the hours and minutes button. This is the time that the

machine will turn OFF.

• Repeatedly press SET button until ( ) disappears.
• Press the PROGRAM button until PG1 appears. Unit will automatically operate per

your settings.

Customize Program Cycles

Fig. 4a

Fig. 4b

To run one pre-set program cycle in a 24 hour period (PG1).

PG1

Pre-Setting to run Program One

P1-ON

4 PM HIGH SPEED

P1-OFF

8 AM

To activate pre-set PG1, Press the PROGRAM button once. PG1 will be displayed.
Your machine is now programmed to run from 4pm to 8am on HIGH (Fig. 3a, 3b).

Pre-Set Program Cycle

Fig. 3a

Fig. 3b

035-00438 17005 OM eng/fr/sp 8/3/01 12:44 PM Page 5

Advertising