Honeywell Local Operator Interface S7999B - Manual (Page 24)

S7999B, S7999C SOLA LOCAL OPERATOR INTERFACE
65-0303—05 24
Warm Weather Shutdown
Configuration
Table 14 displays Warm Weather Setpoint configuration
parameters.
Demand Priority Configuration
Parameters
Fig. 42 displays R7910A Hydronic Control Demand Priority
configuration options. Press the arrows to change the priority
order.
Fig. 42. Demand priority configuration.
Plate preheat
setpoint
-40 °F to 266 °F (-40 °C to 130 °C)
Plate preheat on
recognition time
___hour ___min ___sec
Plate preheat on
hysteresis
-0 °F to 180 °F (-17 °C to 82 °C)
Plate preheat off
hysteresis
-0 °F to 180 °F (-17 °C to 82 °C)
Plate preheat detect
on threshold
-0 °F to 180 °F (-17 °C to 82 °C)
Plate preheat detect
off threshold
-0 °F to 180 °F (-17 °C to 82 °C)
Plate preheat
minimum on time
___hour ___min ___sec
Plate preheat delay
after tap
___hour ___min ___sec
Table 13. DHW Plate Heat Exchanger
Configuration Parameters. (Continued)
Parameter Comment
Table 14. Warm Weather Setpoint
Configuration Parameters.
Parameter Comment
Enable Enabled, disabled
Setpoint -40 °F to 266 °F (-40 °C to 130 °C)