Honeywell Local Operator Interface S7999B - Manual (Page 47)

S7999B, S7999C SOLA LOCAL OPERATOR INTERFACE
47 65-0303—05
Fig. 99. Pump test.
S7999B OR S7999C
DISPLAY SETUP AND
DIAGNOSTICS
The following pages apply to display setup and diagnostics for
the S7999B or S7999C OI Displays.
Setup
The Setup button on the Home page (for S7999B OI Display)
or Display Setup Button on the Configuration Screen for the
S7999C OI Display is selected to go to these pages. The Setup
screen (see Fig. 100) is displayed first. It allows for some OI
Display settings. The Advanced Setup button permits the user
to run some diagnostic functions for the display and to set
advanced features for run-time operation. See “Advanced
Setup” on page 48 for these features.
Fig. 100. R7910A setup.
If Contrast or Volume are changed, Fig. 101 displays to allow
saving these changes.
Fig. 101. Setup settings changed.
Cleaning the Screen
When the user wants to clean the touch screen, the CLEAN
SCREEN button is selected to freeze touch input temporarily for
30 seconds to allow the user to clean the screen. (See Fig. 102.)
Fig. 102. Clean screen setup.
A countdown screen (Fig. 103) displays during the screen
disable period. It disappears when the touch screen is
re-enabled.