Hotpoint HDA2030 - Manual (Page 12)

How to load your
is a random retied load, the most common type you
will have.
Make sure dishes are properly loaded to insure that
water can reach the
surfaces. The wash arm in the
bottom sprays water up. The tower that rises in the
center sends water out over the dishes to wash the items
in the upper rack. A spray arm in the top washes down
also. Make sure to place tall items to the outside so the
upper wash arm is not blocked.
OUT FOR THIS.
The washer tower rises through the center of the bottom
rack during the wash and rinse portions of the
Don’t block it or load
things next to it. Also, be
careful not to let a portion of an item such as a pot or
dish handle extend through the bottom rack. This could
block the wash arm and cause poor washing
How to load the
Sauce pans, mixing bowls and other small items may be
placed—face down—in this top rack. The top rack is
handy for all kinds of odd shapes. The top rack is best for glasses, cups and saucers.
Two rows of cups can be washed when using the folding
shelf. Load the bottom row first, then fold down the
shelf and load the top row. Cups and glasses fit best
along the sides. This is the place for dishwasher-safe
plastics, too. Make sure small plastic items are lodged
in tightly so they can’t fall onto the heating
Arrange stemware so that it cannot move easily.
Don’t let the glasses touch each other.