Home Automation 62A02-1 - Manual

Model 62A02-1 Hi-Fi Zone Amplifier Card (ZAC)
62I02-1
Home Automation, Inc.
DESCRIPTION
Zone Amplifier Cards (ZAC) can be added at any time to increase the total number of zones to eight.
INSTALLATION
To install a Zone Amplifier Card:
1) Power down the Hi-Fi system by unplugging
both Power Supply units (if applicable) from the
inputs labeled “Power” on the Hi-Fi Main
Assemble.
2) Pull upward on each of the 4 plungers until you
hear them snap
3) Remove the cover from the Hi-Fi Main Assembly
by lifting it away from the
Hi-Fi circuit board.
PLUNGER PLUNGER
PLUNGER PLUNGER