Honeywell DOLPHIN 9700 - Manual (Page 128)

14 - 4
Charging Terminals
The main battery of each terminal charges in 4 hours. The intelligent battery charging system
incorporated into all Dolphin terminals prevents overcharging, which means that Dolphin terminals may
be seated in the base indefinitely without damage to the terminals, battery packs, or the base.
1. Power the base; see Supplying Power on page 14-3.
2. Slide the Dolphin into the terminal well. When the terminal is seated properly the Dock LED lights
green. The Charge LED lights green indicating the terminal is being charged.
Mounting
This base should be mounted to a dry, stable surface. When choosing a location, always bear in mind that
• The mounting location must allow users easy access to the power connector.‘
• The base should be oriented so that users can easily see the LEDs.
Bottom Panel
Desk Mounting
The DIN Rail (7.5 X 35 mm) slot on the bottom panel enables secure mounting.
Installation Hardware
Screw: 3/16 in. dia x 5/8 in. long pan head screw
Washer: 1/2 in. OD x 7/32 in. ID x 3/64 in. thick
Nut: 3/16 in. dia
1. Slide the DIN Rail into the DIN Rail slot on the bottom panel.
2. Turn the base and DIN Rail right side up.
DIN Rail Slot
Rubber Feet