Getting started, Out of the box, Chapter 2 - getting started – Honeywell DOLPHIN 9700 User Manual

Page 13: Out of the box -1

Advertising
background image

2 - 1

2

Getting Started

Out of the Box

Verify that the carton contains the following items:

• Dolphin 9700 mobile computer (the terminal)
• Main battery pack (7.4V Li-ion)
• Quick Start Guide

Note:

If you ordered accessories for your terminals, verify that they are also included with the order.

Be sure to keep the original packaging in the event that the Dolphin terminal should need to be returned
for service. For details, see

Product Service and Repair

on page

16-1.

Step 1. Install the Main Battery Pack

The 9700 is shipped with the battery packaged separate from the unit. Follow the steps below to install
the main battery.

1. Release the hand strap near the base of the terminal making it easier to access the battery door.

2. Remove the battery door by releasing the door latch and pulling up with a hinging motion.

3. Insert the battery into the battery well.

4. Replace the battery door. Apply pressure to engage the door latch.

Note: The battery door must be installed prior to powering the unit.

5. Reattach the hand strap.

We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result
in damage not covered by the warranty.

!

Advertising