Honeywell TM005X User Manual

Page 6

Advertising
background image

11

11

The remote temperature and humidity for channel one, two and three

can be recalled by pressing CHANNEL button.

The wave icon is located above the remote channel number and

indicates the reception status from the remote sensor.

The following three types of reception status may be displayed:

The unit is in searching mode.

Temperature and humidity readings are securely

registered.

No signals detected.

- - -

NOTE: If the indoor or remote temperature and/or humidity goes above

or below operating range stated in specifications, the main unit’s

display will show dashes “- - -”

COMFORT LEVEL INDICATORS

The Wireless Thermo-Hygrometer is capable of detecting and

displaying the present comfort levels for the surrounding environment.

The environmental comfort level is detected, interpreted and displayed

on the main unit’s display based on the combination of the current

indoor and remote temperature and humidity readings. The four

following comfort levels may be shown: (comfort), (wet), (dry)

and No Indicator.

12

Indicator

displayed

Temperature

Range

Humidity

Range

Shows current

condition

20°C to 25°C

(68°F to 77°F)

40%RH-

70%RH

Ideal for both

relative humidity

and temperature

-5°C to 50°C

(23°F to122°F)

OVER

70%RH

Contains excess

moisture

5°C to 50°C

(23°F to122°F)

BELOW

40%RH

Contains

inadequate

moisture

MAXIMUM AND MINIMUM MEMORY

The maximum and minimum record of the indoor and remote

temperature and humidity will be automatically stored in the memory of

the main unit (receiver).

To display the minimum, maximum or the current reading press the

MEMORY button after desired mode (indoor or remote) is selected.

If no button is pressed for the next 15 seconds, the unit will return to the

current temperature and humidity display for applicable mode.

To clear the memory, press and hold the MEMORY button for two

seconds and all previously stored readings will be erased.


AUTO-SCANNING

Press and hold the CHANNEL button for 2 seconds – the icon “

3

will appear on the main unit display above the COMFORT LEVEL

indicator. The indoor temperature and all 3 remote temperatures will be

Advertising