Hyundai IT HY-DVDR - Manual (Page 13)

-13-
OPERATIONS
Preparation
u Turn on TV set and select AV as the TV input
u Switch on the related equipment if the player has been
connected to amplifier etc.
u Most of the functions are operated by remote control .
Either the operation of the remote control or front panel
will be affected when their buttons indicate the same
function
1. DVD player Operation
PLAY
1. Connect AC power cord to AC outlet.
2. Switch on the power, VFD shows relative information
that means power supply is normal.
Note: full screen display indicates initial self checking. A
few seconds later it will display “TV”
3. Press DVD button to work under DVD mode
4. Press OPEN/CLOSE button to open disc tray. “OPEN”
will be displayed on the lower right of TV screen.
5. Press (OPEN/CLOSE)button again to close the disc
tray CLOSE is displayed on the lower right of TV screen
during closing, then it will display LOADING.
6. After the disc is loaded, press PLAY button to play back
disc loaded.
STOP
Press STOP button to stop playing.
PREV/NEXT
Press PREV button or NEXT button on remote control dur-
ing playback, a chapter (DVD/VCD) or track (CD) is
skipped back or ahead correspondently each time the
button is pressed
FF/FB
Press FF/FB on the remote control during playback and
the unit will enter FF/FB status.The speed of FF/FB is rela-
tively slow from the beginning. When pressed again, the
speed will become faster. The more times that you press
the buttons, the faster the fast forward or reverse speed
will be. There are 3 levels of speed available: x2, x4, x8. To
return to normal play,press PLAY button on the player or
remote control.
Note: Some discs including MP3 disc have no such
function.
SLOW
Press SLOW button on remote control during playback
of a disc and the unit works slow playing. There are 3
levels of speed available:1/2, 1/4,1/8.
Note: Some discs have no such function.
PAUSE/STEP
Press PAUSE/STEP button during play, the player will enter
the still picture mode. If the button is pressed again, the
disc is advanced by one frame (step). When the button is
kept pressed, consecutive frame advance works. To re-
turn to the normal play mode, press PLAY button.
Note: Some discs have no such function.
NUMBER (0-9.+10,-- button)
Press NUMBERl(0-9.+10) button and then press OK but-
ton allows you to access directly any desired track when
a disc is playing.
Note: -- button has no function under DVD mode
MUTE
Press MUTE button during playback, the player shows
MUTE and there is no audio output (silence), press( MUTE)
or VOL-.VOL+ or press PLAY again to cancel MUTE
display.
VOL+/VOL-
Press VOL+/VOL-button during play may change volume
for audio output.
Note:VOL button loses function for coaxial/optical digital
output.
ANGLE
Press ANGLE continuously during playback to toggle
available angles if the disc has multi-angle function.
AUDIO(L/R)
Press AUDIO button during playback to toggle between
available audio language recorded on the disc if the disc
has multi-language.
ZOOM
Press ZOOM button during play or pause status to zoom
up the current picture.
DVR-˵Ã÷Êé.p65 03-9-16, 15:18 13