HTC Z5426 - Manual (Page 19)

CONTROLS
English -19
Seat Adjustment Knobs
The seat can be adjusted lengthways. When making
adjustments, loosen the four knobs under the seat
pan, after which the seat can be moved backward or
forward. Retighten the knobs at the desired setting.
Fuses
The fuses are located in a holder at the right hand side
of the battery compartment. They are flat pin fuses of
the same type used in automobiles.
There are three fuses as well as a socket for one
spare fuse.
Fuse ratings and functions:
• 20 A, Primary fuse.
• 7.5 A, Mower deck coupling.
• 7.5 A, Accessory outlet.
• Socket for spare fuse.
CZ-1
Lengthwise adjustment
8011-483
Fuses
Bypass Linkages
When pushing or pulling the mower, engage the IZT
(Integrated Zero Turn Transaxle) bypass linkages.
The IZT bypass linkages are located on the rear of the
frame, below the rear engine guard.
• Raise the deck into the highest cutting
position
• Pull the IZT bypass linkages out and into the
slots. Release the linkages so they are held
into the bypass position
• To reengage the IZT's into drive, reverse the
above procedure
8011-722
1. IZT Bypass Linkages
Bypass position with linkage head outside rear deck
1