HTC Z5426 - Manual (Page 21)

CONTROLS
English -21
Blade switch
To engage the mower deck, pull the blade switch knob
out. The mower blades are disengaged when the knob
is pressed down fully.
8011-750
Blade Switch
Ignition Switch
The ignition key is placed on the control panel and is
used to start and stop the engine.
8011-748
Ignition Switch
WARNING!
Do not run the starter for more
than five seconds each time. If
the engine does not start, wait
10 seconds before retrying.
Choke Control
The choke control is used for cold starts to provide the
engine with a richer fuel mixture.
The throttle control is equipped with a choke detent.
Pressing the throttle control all of the way forward will
choke the engine. For full throttle, press the throttle
control forward until you feel the detent.
8011-480
Choke control