Engine cooling air intake, Throttle cable, Maintenance – HTC Z5426 User Manual

Page 38

Advertising
background image

English

-38

MAINTENANCE

Engine Cooling Air Intake

Check that the engine’s cooling air intake is free from

leaves, grass, and dirt.
If the cooling air intake is clogged, engine cooling

deteriorates, which can lead to engine damage.

Throttle Cable

Check that the engine responds to throttle increases

and that a good engine speed is attained at full

throttle.
If doubts arise, contact the service workshop.
If adjustments are necessary, they can be made as

follows for the lower cable:
1. Loosen the clamping screw for the cable’s outer

casing and move the throttle to the full throttle

position (no choke).

2. Push the throttle cable’s outer casing as far to the

right as possible and tighten the clamping screw.

3. Set the throttle control to the choke position and

check that full choke is achieved.

8011-492

Adjusting the throttle cable

8011-491

Check and clean the cooling air intake

8011-404

Choke start position

Advertising
This manual is related to the following products: