Replacing the air filter, Kohler engine, Maintenance – HTC Z5426 User Manual

Page 39

Advertising
background image

English

-39

MAINTENANCE

Replacing the Air Filter

If the engine seems weak or runs unevenly, the air

filter may be clogged. If the machine is run with a

dirty air filter, the spark plug can become fouled. It

is important to replace the air filter regularly (see

"Maintenance Schedule" for proper service intervals).
Kohler Engine
The standard engine is not equipped with a prefilter.

As an option, a prefilter can be installed on the inside

of the air filter cover.

1. Loosen the two retaining knobs and remove

the cover. If the engine has a prefilter, it is

mounted on the inside of the cover.

2. Clean the area around the filter element to

prevent debris from getting into the engine

when the element is removed.

3. Remove the filter element. Replace a dirty,

bent or damaged element with a new one.

Handle the new element carefully and do

not use if the sealing surfaces are bent or

damaged. If the element can be reused, tap it

against a solid surface to remove dust.

4. Check the air cleaner base. Make sure it is

secured and not bent or damaged. Also check

the air filter cover for damage or improper fit.

Replace all damaged air cleaner components.

5. Install the filter element. Check that it fits

properly and that no air leaks occur.

6. Install the cover and tighten knobs by hand.

IMPORTANT INFORMATION
Operating the engine with loose or

damaged air cleaner components could

allow unfiltered air into the engine causing

premature wear and failure.

8011-736

Air filter cover

8011-737

Air filter cover

IMPORTANT INFORMATION
Do not use compressed air to clean the air

filter.
Filter should be assembled dry and not be

oiled.

Advertising
This manual is related to the following products: