Cleaning, Caster wheels, Hardware – HTC Z5426 User Manual

Page 49: Maintenance

Advertising
background image

English

-49

MAINTENANCE

Cleaning

Regular cleaning and washing, especially under the

mower deck, will increase the machine’s life-span.

Make it a habit to clean the machine directly after use

(after it is cooled), before the dirt sticks.
Do not spray water on the top of the mower deck. Use

compressed air to clean the top side of mower deck.

Regularly clean deck and underside of the deck with

normal water pressure. Do not use a high pressure

washer or steam cleaner. Avoid spraying engine and

electrical components with water.
Do not rinse hot surfaces with cold water. Let unit cool

before washing.

Use protective glasses when

cleaning and washing.

IMPORTANT INFORMATION
DO NOT add any type of tire liner or foam

fill material to the tires. Excessive loads

created by foam filled tires will cause

premature failures.
Only use O.E.M. specified tires.

8050-092

Cleaning

Caster Wheels

Check every 200 hours. Check that wheels rotate

freely. If not, take the unit to your dealer for service.
Foam filled tires or solid tires will void the warranty.
Removal and Reinstallation
Remove nut and caster bolt.
Pull the wheel out of the fork and take care of the

sleeve.
Install in reverse order. Tighten caster bolt.

Hardware

Check daily. Inspect the entire machine for loose or

missing hardware.

1

8011-619

1. Caster bolt
Caster wheel

Advertising
This manual is related to the following products: