HONDA EB7000i - Manual (Page 16)

14
CONTROL & FEATURES
Voltage Selector Switch
Switch Position
AC Circuit Protectors
120/240V:
120V ONLY:
AC CIRCUIT PROTECTOR
PUSH
ON
VOLTAGE SELECTOR SWITCH
CIRCUIT PROTECTOR
for Receptacle CIRCUIT PROTECTOR
for Receptacle
CIRCUIT PROTECTOR
for Receptacle
120V 30A
120/240V 30A
OFF
120V 20A
120V/240V
120V ONLY
CIRCUIT PROTECTOR
for Receptacle
120V 20A
The voltage selector switch switches generator output to produce ‘‘120
V ONLY’’ or ‘‘120/240V’’. If a 240V appliance is connected to the 4-
prong receptacle, the switch must be in the ‘‘120/240V’’ position. If
only a 120V appliance is being connected to any of the 120V 3-prong
receptacles, select the ‘‘120V ONLY’’ position.
The AC circuit protectors will automatically switch OFF if there is a
short circuit or a significant overload of the generator at each
receptacle. If an AC circuit protector switches OFF automatically, check
that the appliance is working properly and does not exceed the rated
load capacity of the circuit before resetting the AC circuit protector ON.
Select the voltage before starting the engine.
The 120V and 120/240V receptacles can be used
simultaneously.
ONLY the 120V receptacles can be used. Do not use the
120/240V receptacle in this position. The most power will be available
at the 30A 120V locking plug receptacle.
05/12/21 14:31:26 31Z12600_015