HONDA EB7000i - Manual (Page 23)

21
CONTROL & FEATURES
i-Monitor
i-Monitor at Start Up
i-Monitor Display
i-Monitor Display Mode 1 Total Operating Hours
i-MONITOR BUTTON
SINGLE-DIGIT
SCREEN DISPLAY
FOUR-DIGIT
SCREEN DISPLAY
TM
TM
TM
TM
TM
TM
TM
TM
TM
TM
TM
The i-Monitor is a user interface that allows the operator to view
(when the generator is running) total operating time in hours,
generator output, engine RPM and error messages. The different
display modes are selected by pressing the i-Monitor
button.
The i-Monitor display is divided into two screens. The single-digit
screen displays the i-Monitor mode which is represented by a
number 1 through 3. The four-digit screen displays the three mode
values total operating hours, power output and engine RPM or any
activated error messages.
This mode displays the total operating hours of the generator. When
the generator is running, the total operating time accumulates. If the
total operating time is less than one hour, the numeric display will be
‘‘0.’’ When the operating time is one hour or greater, the display will
be ‘‘1’’ or ‘‘2’’ and so on. Base the generator’s maintenance schedule
on the accumulated time displayed.
During start up, the i-Monitor display and all three indicators will
simultaneously blink once. The condition of the i-Monitor display
and all three indicators can be checked with the aid of an observer.
Once the generator is running, the Output indicator (green) and the
i-Monitor
display will remain lit.
TM
05/12/21 14:32:07 31Z12600_022