HONDA EB7000i - Manual (Page 41)

39
OPERATION
ECOTHROTTLE SYSTEM
ON O O F F F F
ECOTHROTTLE SWITCH TM
TM
TM
TM
TM
TM
TM
Appliances with large start-up power demands may not allow the
engine to reach normal operating rpm when they are connected to the
generator. Turn the EcoThrottle
to the OFF position and connect the
appliance to the generator. If the engine still will not reach normal
operating speed, check that the appliance does not exceed the rated
load capacity of the generator.
If high electrical loads are connected simultaneously, turn the
EcoThrottle
switch to the OFF position to reduce voltage changes.
The EcoThrottle system is not effective for use with appliances that
require only momentary power. If the tool or appliance will be turned
ON and OFF quickly, the EcoThrottle
switch should be in the OFF
position.
With the switch in the ON position, engine speed is automatically
lowered when loads are reduced, turned OFF or disconnected. When
appliances are turned ON or reconnected, the engine returns to the
proper speed to power the electrical load. In the OFF position, the
EcoThrottle
system does not operate.
05/12/21 14:34:13 31Z12600_040