Wheel kit installation, 79 assembly – HONDA EB7000i User Manual
Page 81
79
ASSEMBLY
Wheel Kit Installation
TORQUE:
AXLE
WHEEL (2)
STAND (2)
LONGER
20 mm WASHER (2)
8
16 mm FLANGE BOLT (4)
4.0
28 mm COTTER PIN (2)
8
16 mm
FLANGE BOLT (4)
IN
INSIDE
17
22 lbf·ft (24
29 N·m , 2.4
3.0 kgf·m)
Install the two stands on the under frame using four 8
16 mm
flange bolts.
Install the axle assembly on the generator using four 8
16 mm
flange bolts.
Install the two wheels on the axle shaft using the washers and cotter
pins.
If the wheel kit is not installed, it may be possible for dirt and debris to
be drawn into the generator air intake causing possible generator
damage. Always operate the generator with the wheel kit installed.
Do not operate the generator without the wheel kit installed. The
wheel kit provides an air space between the ground and the generator
air intake.
1.
2.
3.
05/12/21 14:39:21 31Z12600_080