HONDA EB7000i - Manual (Page 82)

80
ASSEMBLY
Handle Installation
To Extend Handle:
TORQUE:
SPRING WASHER (2)
12 mm WASHER (2)
HANDLE HOLDER BOLT (2)
HANDLE ASSEMBLY
HANDLE LEVER
HANDLE
17 22 lbf·ft (24 29 N·m , 2.4 3.0 kgf·m)
Install the handle assembly on the generator upper frame using the 12
mm washers, spring washers and handle holder bolts.
Operation must be checked after attaching a handle.
Raise handle to horizontal position. The handle will click into place
when locked.
05/12/21 14:39:28 31Z12600_081