HP Photosmart 140 series - Manual (Page 26)

hp photosmart 140 series
chapter 2
22
remove a memory card
Once the memory card light stops blinking, gently pull the memory card to
remove it from the printer’s memory card slot.
Caution! Do not pull out the memory card while the memory card light is
blinking. A blinking light means that the printer is accessing the memory
card. Wait until the memory card light remains solid. Removing a memory
card while it is being accessed may damage the printer and the memory
card or corrupt the information on the memory card.
decide which photos to print
To print photos from your memory card, you must know their index numbers. Print
a photo index to see the photos on your memory card along with their index
numbers.
Note: You can print the first 2000 photos on an inserted memory card using
the printer’s control panel. If your memory card contains more than 2000
photos, save the photos to your computer and access them from there. For
more information, see the HP Photosmart Printer Help. For information about
viewing the printer help, see view the hp photosmart printer help on
page 2.
print a photo index
A photo index shows thumbnail views and index numbers for all the photos
stored on the memory card, up to 2000 photos. The photos appear in the order
in which they are stored on the memory card. A photo index will print up to 28
photos per page.
Note: Depending on the number of photos stored on the memory card, a
photo index could be several pages long.