HP Photosmart 140 series - Manual (Page 44)

hp photosmart 140 series
chapter 4
40
store your printer
Protect the printer and print cartridge by storing them properly when you are not
using them.
store the printer
Your printer is built to withstand long or short periods of inactivity. Close the
paper tray door when the printer is not in use. Store the printer indoors out of
direct sunlight in a place without temperature extremes.
store the print cartridge
Always transport and store the active print cartridge inside the printer. The printer
stores the print cartridge in a protective cap.
Make sure the printer completes its power-down cycle before you unplug the
power cord. This allows the printer to store the print cartridge properly.
If the printer and print cartridge have been unused for one month or more, clean
the print cartridge before using it. For more information, see clean the print
cartridge on page 37.
Calibration page
• The check marks verify that the print
cartridge is installed correctly and
functioning properly.
• If an “x” appears to the left of any of the
bars, calibrate the print cartridge again. If
the “x” still appears, replace the print
cartridge.
For more information, go to
www.hp.com/support or contact HP
support.