Focal Solid 4 - Manual

Specifications
Focal® is a trademark of Focal-JMlab® - BP 374 - 108, rue de l’Avenir - 42353 La Talaudière cedex
France - Tél. (33) 04 77 43 57 00 - Fax (33) 04 77 37 65 87 - www.focal-fr.com - SCBD081505/1
P r e l i m i n a r y s p e c i f i c a t i o n s
Solid 4
4 c h a n n e l c l a s s A B p o w e r a m p l i f i e r
• 2,3 or 4 channel amplifier
• Remote control
• Stable into 2 Ohms (4 x 100W)
• Pseudo-balanced RCA input
•
Auto power
Mechanical Drawing
Nominal power measured at
14.4V continuously @ 4Ω
4 x 75W
Nominal power measured at
14.4V continuously @ 2Ω
4 x 100W
Power in bridge mode
measured at 14.4V
continuously @ 4Ω
2 x 200W
Signal/noise ratio > 80dB (A)
Damping factor at 4Ω 50 to 1kHz
Frequency response (-1dB) 10 Hz – 60kHz
Input impedance 20kΩ
Input sensitivity 0.2 – 5V
Input sensitivity high level 0.4 - 9Vrms
High-pass crossover
(1/2 and 3/4 channels) 50 – 150Hz (12
dB/oct.)
Low-pass crossover
(sub channel) 50 – 150Hz (12
dB/oct.)
Remote control (sub channel) YES
Adjustable bass boost level -
Variable phase (SUB) -
Subsonic filter -
Maximum cross section of
loudspeaker cables
10mm 2
7 AWG
Maximum cross section of
power cables
35mm 2
2 AWG
Protections Short-circuit
Thermal overload
Overvoltage
Polarity reversal
Dimensions (HxWxD)
1 3/4 x 11 13/16 x 7 7/8 ”
(45 x 300 x 200mm)
THD / Power
Power vs THD@4Ohm
1