Printing a sample card, Entering the print only command, Entering the print with mag encoding command – HID FARGO HDP5000 User Guide User Manual
Page 34: Managing printer from the cups web interface, Printer-specific options, Entering the print only command 34, Entering the print with mag encoding command 34, Managing printer from the cups web interface. 34
Printing a Sample Card
Entering the Print Only Command
Using the Fargo Card Printer
----------------------------
To test the functionality of the printer, you can type the following command
to print a sample card (root privileges not necessary):
$ lpr samplecard.jpg
Entering the Print with Mag Encoding Command
Run the following command:
# lp –d [PrintQueueName] –o “Magtrack1=%25MAGTEST1%3F
Magtrack2=%3B1234567890%3F Magtrack3=%3B1234567890%3F” [filename]
Managing Printer from the Cups Web Interface.
The Web printer management interface is located at:
From there you can perform all printer management tasks with a few simple mouse clicks.
Printer-Specific Options
Each printer has its own options that are based on the options in the PPD (driver) file. The
lpoptions command provides a way to see a list of the available options:
lpoptions –p HDP5000 -l ENTER
Each option starts with the option name, a slash, the human readable text for that option, and a
colon. This is followed by a list of values for that option. The asterisk (*) in from of the
value indicates that this is the default setting.
The options themselves follow the colon:
To see a list of available printers
lpstat –p –d ENTER
HDP5000 Cups (Linux & MAC OS) User Guide Rev1.1
34