Operation (contd.), Accessory installation – Freecom Technologies RCS-M2000U User Manual

Page 10

Advertising
background image

OPERATION (contd.)

6.

Press “AUTO SWING” button on control panel to begin
oscillating vertical louvers. The vertical louvers will move
slowly from left to right and back again for optimum air
distribution. Press button again to maintain a desired
“fixed” position to distribute more cooling air to one side
of the room. DO NOT adjust vertical louvers manually.

7.

If desired, press “TIMER-SET” button on control panel to
program the air conditioning unit to turn off in 1, 2, 3, 4,
5, 6, 7, 8, or 9 hours.

To cancel timer setting, press "TIMER-RESET" button.

ACCESSORY INSTALLATION

Exhaust Duct Kit

The Exhaust Duct Kit is an accessory which, when used with the RCS-M2000 series air
conditioning units, will increase cooling efficiency by directing warm air exhaust out of the
room. The Exhaust Duct Kit can be used with other Freecom accessories, such as the
Window Panel Vent Kit (included), Sliding Door Vent Kit, Ceiling Vent Kit, or Through-the-
Wall Kit for maximum cooling efficiency.

WARNING: The Freecom Exhaust Duct Kit has been specially designed for use with

the RCS-M2000 series air conditioning units. Using other duct materials, compo-
nents, or extensions will decrease cooling efficiency or cause damage to the
product, and void your warranty.

1.

Press “POWER ON/OFF” button to stop unit if it is operating.
Unplug power cord from outlet.

2.

Slide square end of bent exhaust duct kit over exhaust on rear
of unit. Push nozzle onto round connector end of vent duct pipe.

3.

Install outlet nozzle in an open window, through a wall or false
ceiling.

10

Advertising
This manual is related to the following products: