Introduction, How to obtain parts, Manual status information – Fluke 5725A User Manual
Page 143: Newer instruments, Service centers, 1. introduction, 2. how to obtain parts, 3. manual status information, 4. newer instruments, 5. service centers
List of Replaceable Parts
Introduction
8
8-3
8-1. Introduction
This chapter contains an illustrated list of replaceable parts for the 7-300, 7-600, 12B, and
18 Meters. Parts are listed by assembly; alphabetized by reference designator. Each
assembly is accompanied by an illustration showing the location of each part and its
reference designator. The parts lists give the following information:
•
Reference designator
•
An indication if the part is subject to damage by static discharge
•
Description
•
Fluke stock number
•
Total quantity
•
Any special notes (i.e., factory-selected part)
Caution
A
*
symbol indicates a device that may be damaged by static
discharge.
8-2. How to Obtain Parts
Electrical components may be ordered directly from the manufacturer by using the
manufacturers part number, or from the Fluke Corporation and its authorized
representatives by using the part number under the heading FLUKE STOCK NO. In the
U.S., order directly from the Fluke Parts Dept. by calling 1-800-526-4731. Parts price
information is available from the Fluke Corporation or its representatives. Prices are also
available in a Fluke Replacement Parts Catalog which is available on request.
In the event that the part ordered has been replaced by a new or improved part, the
replacement will be accompanied by an explanatory note and installation instructions, if
necessary.
To ensure prompt delivery of the correct part, include the following information when
you place an order:
•
Instrument model and serial number
•
Part number and revision level of the pca containing the part.
•
Reference designator
•
Fluke stock number
•
Description (as given under the DESCRIPTION heading)
•
Quantity
8-3. Manual Status Information
The Manual Status Information table that precedes the parts list defines the assembly
revision levels that are documented in the manual. Revision levels are printed on the
component side of each pca.
8-4. Newer Instruments
Changes and improvements made to the instrument are identified by incrementing the
revision letter marked on the affected pca. These changes are documented on a manual
supplement which, when applicable, is included with the product.
8-5. Service Centers
A list of service centers is available on the Fluke web sit at www.fluke.com.