Fluke 5725A - Manual (Page 21)

Introduction and Specifications
How to Use the Manuals
1
1-5
1-3. How to Use the Manuals
The following paragraphs describe how each manual addresses the 5725A.
1-4. 5725A Getting Started Manual
Use this manual for basic getting started information, contacting Fluke, unpacking, and
general specifications. This manual also provides setup and operation information for the
5725A Amplifier, descriptions of the 5725A front and rear-panel features, and
information about setting up and powering up the 5725A. Please read this information
before operating the amplifier.
1-5. 5725A Instruction Manual
Use the 5725A Instruction Manual for installing the 5725A, learning about its front and
rear-panel features, and for all service-related topics such as maintenance,
troubleshooting, parts lists, and schematics. (The 5725A Instruction Manual is the
service and operator manual for the 5725A.)
Although the instruction manual also contains a section devoted to 5725A operating
notes, once the 5725A is up and running you will find that the 5700A/5720A Operator
Manual contains most of the information you need to operate the 5725A.
1-6. 5700A/5720A Series II Manual Set
The 5700A/5720A Series II Manual Set consists of a Getting Started Manual, an
Operator Reference Guide, a Remote Programming Reference Guide and a CD-ROM
containing an Operators Manual and Service Manual (in addition to all the other manuals
provided in printed form).
1-7. 5700A/5720A Series II Operator Manual
The 5700A/5720A Series II Operator Manual contains the following information
pertaining to the 5725A:
•
Specifications for both the 5700A and 5725A (these same specifications are in this
Instruction Manual)
•
Cable connections to a UUT for amplified voltage and current
•
Front panel (local) operation
•
Remote control operation, IEEE-488 or RS-232
•
Self calibration
•
Fault codes (these appear on the 5700A Control Display, or are read from the 5700A
in remote control operation)
•
Calibration constant symbolic names
•
Glossary of calibration-related terms
1-8. 5700A/5720A Series II Operator Reference Guide
The 5700A/5720A Series II Operator Reference Guide contains a summary of operating
instructions from the Operator Manual. This booklet contains information needed to start
up and operate the 5700A, but since the 5700A controls the 5725A, much of this
information applies to the 5725A.