Carton contents, Safety – Flymo Hover Vac HV280 User Manual

Page 2

Advertising
background image

Carton Contents

IMPORTANT !
Please check the contents of the carton are correct BEFORE assembling your new Flymo product.

IF ANY PARTS ARE MISSING CONTACT:-
Husqvarna Outdoor Products Customer Service Department direct
Telephone : 0870 609 1901, Fax : 0870 609 1902

Safety

If not used properly this product can be dangerous! This product can cause serious injury to the oper-
ator and others, the warnings and safety instructions must be followed to ensure reasonable safety and
efficiency in using this product. The operator is responsible for following the warning and safety
instructions in this manual and on the product.

Explanation of Symbols on the Hover Vac

Warning

Read the user instructions carefully to
make sure you understand all the con-
trols and what they do.

Switch off! Remove plug from mains
before adjusting, cleaning or if cable is
entangled or damaged. Keep the cable
away from the cutting parts.

Keep bystanders away. Do not operate
whilst people especially children or pets
are in the area.

Do not operate in the rain or leave the
product outdoors while it is raining.

The use of eye protection is recommend-
ed to protect against objects thrown by
the cutting parts.

General
1. Never allow children or people unfamiliar with these

instructions to use the product. Local regulations
may restrict the age of the operator.

2. Only use the product in the manner and for the

functions described in these instructions.

3. Never operate the product when you are tired, ill or

under the influence of alcohol, drugs or medicine.

4. The operator or user is responsible for accidents or

hazards occurring to other people or their property.

Electrical
1. The British Standards Institute recommend the use

of a Residual Current Device (R.C.D.) with a trip-
ping current of not more than 30mA. Even with a
R.C.D. installed 100% safety cannot be guaranteed
and safe working practice must be followed at all
times. Check your R.C.D. every time you use it.

2. Before use, examine cable for damage, replace it if

there are signs of damage or ageing.

3. Do not use the product if the electric cables are

damaged or worn.

cable clip

cable clip

electric cable

with moulded

on plug

lower handle

fixing pin

instruction

manual

plastic

cutters

bolt

upper handle

start/stop lever

switchbox

washers

nut

bolt

handle knob

handle knob

fixing

pin

Advertising
This manual is related to the following products: