FUJITSU M3096EX - Manual (Page 24)

3 – 3
3.3 Connections
Connect the image scanner using the following procedure.
①
Set the power switch to off.
③
Connect the interface cables (for M3096EX).
Connect the interface cables to the interface connectors and fasten the cables
with catches and screws as shown below.
Connect the other end of each interface cable to the host computer.
②
Connect the power cable.
Connect the power cable to the power inlet on the back of the image scanner.
Connect the other end of the power cable to a power outlet.
Power inlet
for Europe
for North America
Back of the image scanner
Power cable
Power outlet
Power switch
Interface cable for video
Interface cable for RS232C
Catches
To the host system Screws