Installing the hood – FRIGIDAIRE RH36WC60GS User Manual

Page 9

Advertising
background image

9

9

9

9

9

Installing the hood

Mounting the duct cover bracket

Mounting the duct cover bracket

Mounting the duct cover bracket

Mounting the duct cover bracket

Mounting the duct cover bracket

The duct bracket should be installed against the
back wall and flush with the ceiling. This bracket will
hold the telescopic duct cover in place at the top

.
Secur

Secur

Secur

Secur

Secur e the bracket to the wall:

e the bracket to the wall:

e the bracket to the wall:

e the bracket to the wall:

e the bracket to the wall:

t Align the marked centerline on the bracket with

the centerline on the wall.

t Mark 2 screw hole locations in the wall.

t Drill 5/16" pilot holes in the marked locations.

t Install wall fastener anchors.

t Drive wood screws, by hand, into the fastener to

allow anchors to expand. Remove the screws.

t Secure the bracket to the wall with wood screws

and/or fasteners.

Ceiling ducting

Ceiling ducting

Ceiling ducting

Ceiling ducting

Ceiling ducting

If the duct will vent straight up to the ceiling:
t Use level to draw a line straight up, from the

centerline on the template to the ceiling.

t Measure at least 4 -3/4 ” from the back wall to

the circle center of an 8-½” hole on the ceiling.

W

W

W

W

Wall ducting

all ducting

all ducting

all ducting

all ducting

If ductwork will vent to rear:

t Use a level to draw a line straight up from the

centerline on the template.

t Measure at least 23 - 3/4" (the measure might

vary depending on the elbow used) above the
pencil line that indicates the bottom installation
height, to the circle center of an 8-½” diameter
duct hole (Hole may be elongated for duct elbow).

House wiring location

House wiring location

House wiring location

House wiring location

House wiring location

t The junction box is located on the top left side of

the hood.

t Wiring should enter the back wall at least 20"

above the bottom of the installation height, and
within 5-7/8" and 4-7/8"of the left side of the
centerline.

Advertising
This manual is related to the following products: