Operating instructions – FRIGIDAIRE DEHUMIDIFIER 2020264A0429 User Manual

Page 4

Advertising
background image

4

2009 Electrolux Home Products, Inc.

All rights reserved.

Allow the unit to reach room temperature before operating.
To begin operating the dehumidifier, follow these steps:

1. Plug the power cord into a properly grounded 115 volt AC outlet. Note the POWER indicators will illuminate.

If the "BUCKET FULL" light is on, remove the bucket and re-install to reset the float switch.

NOTE:

2. To turn the unit on rotate the knob until it points to the CONTINUOUS setting. It is recommended you leave the
unit running in the CONTINUOUS setting for the first three or four days until any sweating and dampness odors
have ceased.

3. After a few days when the Relative Humidity has declined, rotate the HUMIDITY knob to a desired point on the
dial so the room is kept at a comfortable concentration. The unit will cycle on and off keeping the desired level
of comfort.

Operating Instructions

Operating Instructions

Unit must be upright for one hour prior to operating.

NOTE:

Advertising