Meridian Audio Meridian two channel power amplifer 559 - Manual (Page 18)

Setting up the stereo power amplifier
13
To connect to passive loudspeakers
559 Stereo Power Amplifier
OFF
● Set the BRIDGE MODE switch to the OFF position.
● Connect one of each pair of the red and black terminals from
the appropriate channel of the 559 Stereo Power Amplifier to
the red and black terminals on the passive loudspeakers.
To bi-wire to passive loudspeakers
559 Stereo Power Amplifier
OFF
BALANCED
● Set the BRIDGE MODE switch to the OFF position.
● Remove the links bridging the LF and HF terminals on the
back of each loudspeaker.
● Connect the LF red and black terminals from each
loudspeaker to the red and black terminals on the appropriate
channel of the 559 Stereo Power Amplifier, using twin
loudspeaker cable.
● Connect the HF red and black terminals from each
loudspeaker to the other pair of red and black terminals on
the appropriate channel of the 559 Stereo Power Amplifier.
Connecting speakers