Furuno GP-1850WD - Manual (Page 57)

9-1
9. MEMORY CARD OPERATIONS
The following data can be saved to memory
cards:
• Mark/line
•
Waypoints/routes
• Track
• Configuration (menu settings)
9.1 Formatting Memory
Cards
Before you can use a memory card it must
be formatted. Note that formatting a used
card erases all saved data.
1. Turn the power off.
2. Insert the memory card you want to
format into the slot.
3. Turn the power on.
4. Press the [MENU] key followed by the
CONFIGURATION and
UPLOAD/DOWNLOAD DATA soft keys.
DWNLOAD
UPLOAD
DGPS 3D
DOWN WPT/RTE TO PC
SAVE DATA TO MEMORY CARD
UPLOAD WPT/RTE FROM PC
RETURN
LOAD DATA FROM MEMORY CARD
Download/upload menu
5. Press the SAVE DATA TO MEMORY
CARD.
DGPS 3D
SAVE
DATA
EDIT
FORMAT
TRACK
MARK/LINE
WAYPOINT/ROUTE
CONFIGURATION
OFF
OFF
OFF
OFF
RETURN
SAVE
DATA
Save data display
6. Press the FORMAT soft keys. You are
asked if you are ready to format the
memory card.