Cleaning and care, Cleaning the exhaust filters, Surface light replacement – FRIGIDAIRE 316495058 User Manual

Page 21

Advertising
background image

CLEANING AND CARE

Disconnect the power cord before cleaning or

leave the door open to deactivate the oven during cleaning.

To avoid risk of personal injury or property damage, do
not operate oven hood without filters properly in place.

Cleaning the exhaust filters

The oven ventilation exhaust filters should be removed and
cleaned often; generally at least once every month.

1. To remove the exhaust ventilation filters, slide the filter to

the rear. Then pull filter downward and push to the other
side. The filter will drop out. Repeat for the 2nd filter.

2. Soak the ventilation filters in hot water using a mild

detergent. Rinse well and shake to dry. Do not use
ammonia or wash in a dishwasher. The aluminum
on the filter will corrode and darken.

3. To reinstall the exhaust ventilation filter, slide it into the

side slot, then push up and toward oven to lock.
Reinstall the 2nd filter using the same procedure.

Front

Rear

Surface lights

Ventilation

filters

Surface light replacement

To avoid risk of personal injury or property damage, wear
gloves when replacing the light bulbs.

1.

circuit breaker.

2.

3.

4.

5. Plug the microwave back into the power supply or turn

the power back on at the main circuit breaker.

Remove the bulb cover mounting screw at light position

Unplug the microwave oven or turn off power at the main

under the microwave.

Replace bulb with 30 watt appliance bulb.

Re-install bulb cover and mounting screw.

Advertising
This manual is related to the following products: