Meridian Audio 808 - Manual (Page 31)

PREFACE
26
INSTALLING THE
CD PLAYER
To connect the 808/808i to a power amplifi er
( Type 0 or 3)
xÈÉxЗК/Ьœ‡V >˜˜iÊ
*œÜiÀÊ
“«ˆvˆiÀ
"


"1
"1/*1/
nän
-«i>ŽiÀ -«i>ŽiÀ
The 808 includes an integrated preamplifi er, allowing you to connect it
directly to a pair of analogue active loudspeakers, or to analogue passive
loudspeakers via a power amplifi er such as the G56 or G57.
• Connect the ANALOGUE OUTPUT connections from the CD player to the
inputs of the analogue active loudspeakers or power amplifi er, using
phono leads.
• If you are using an 808i connect your other sources to the appropriate
inputs.
• Confi gure to Type 0 if using an 808 or 808i with no external inputs, or
Type 3 for an 808i with other inputs in use; see Choosing a standard
setting, page 30.
To connect to other Meridian G Series, 500 Series, or
800 Series equipment
Ê-iÀˆiÃ]ÊxääÊ-iÀˆiГ]КœÀÊnääÊ-iÀˆiÃÊ՘ˆÌ nдn
" -Кi>`К
" -Кi>`
" -
" -
In a system of Meridian products, one of the products acts as the controller
for the system, receiving infra-red commands from the MSR+ and then, if
appropriate, relaying them to the other products via the Comms link.