FRIGIDAIRE Gas Wall Oven - Manual (Page 12)

12
88:88
CLOCK
TIMER
To Set the Clock
When the range is first plugged in, or when the power supply to the appliance has been interrupted, “12:00” will flash in the
display window.
1. Push CLOCK button to select clock entry mode. A beep will be heard.
2. Push UP or DOWN ARROW to set appropriate time. Adjust in one minute increments by tapping UP or DOWN ARROW
or 10 minute increments by pressing and holding UP or DOWN ARROW. Set mode is exited 5 seconds after last UP or
DOWN ARROW entry or 25 seconds after no entry.
To Set the Minute Timer
1.
Press TIMER button. A beep will be heard.
2. The minute timer can be set for any amount of time from 1 minute to 12 hours.
3. Push UP or DOWN ARROW to set appropriate time. Adjusts in one minute increments by tapping UP or DOWN ARROW
or 10 minute increments by pressing and holding UP or DOWN ARROW. Set mode is exited and timer begins counting
down 5 seconds after last entry. Flashing colon indicates timer is active. Timer set mode is canceled if no button is push
for 5 seconds.
4. A single beep will be heard 1 minute before the end of the selected time. When the time runs out, three quick beeps will
be heard and a single reminder beep follows every 10 seconds for the 10 minutes or until the CLOCK button is pressed.
5. An active timer can be cancelled by pressing TIMER button with the timer in the display.
NOTE: Clock can be displayed during timer function by pressing CLOCK button. Flashing colon indicates timer is active in the
background. To return to the timer display, press TIMER button.
Double Oven Models Only
Setting the Clock and Minute Timer