Avoid service checklist – FRIGIDAIRE 318200612 User Manual

Page 13

Advertising
background image

1 3

OCCURRENCE

Entire cooktop does not operate.

Surface element does not heat.

Surface element too hot or not hot
enough.

Food not heating evenly.

Scratches or abrasions on ceramic
glass cooktop surface.

Avoid Service Checklist

Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that are not
the result of defective workmanship or materials in this appliance.

POSSIBLE CAUSE/SOLUTION

House fuse has blown or circuit breaker has tripped. Check/reset breaker or replace
fuse. If the problem is a circuit overload, have this situation corrected by a qualified
electrician.

Service wiring not complete. Contact installation agent or dealer.

Power outage. Check house lights to be sure. Call local electric company.

No power to appliance. Check/reset breaker or replace fuse. If the problem is a
circuit overload, or improper connection of the armored cable supplied with the
appliance, have this situation corrected by a qualified electrician.

Too low heat setting. Turn control to a slightly higher setting until element comes on.

Incorrect control is on. Be sure to use correct control for the element to be used.

Incorrect control setting. Raise or lower setting until proper amount of heat is obtained.
Dial markings are an indicator of relative heat settings and will vary slightly.

Lightweight or warped pans being used. Use only flat, evenly balanced, medium or
heavyweight cookware.

Voltage is incorrect. Be sure appliance is properly connected to the specified power
source.

Use only flat bottom, evenly balanced, medium or heavyweight cookware. Pans
having a flat bottom heat better than warped pans. Cookware material affects
heating. Heavy and medium weight pans heat evenly. Because lightweight pans heat
unevenly, foods may burn easily.

Improper cookware. Select flat-bottomed cookware of a proper size to fit element.

Incorrect control setting. Raise or lower setting until proper amount of heat is obtained.

Coarse particles (such as salt or sand) are between cooktop and utensil. Be sure cooktop
surface and bottom of utensils are clean before use. Small scratches do not affect
cooking and will become less visible with use.

Cleaning materials not recommended for glass ceramic cooktop have been used. See
Ceramic-Glass Cooktop section in this Owner's Guide.

Cookware with rough bottom has been used. Use flat-bottomed, smooth utensils. See
Selecting Surface Cooking Utensils in this Owner's Guide.

Advertising