Engine data, Vehicle dimensions (at curb mass), Maintenance and specifications – FORD 2005 Crown Victoria User Manual
Page 245
2
Add 118 ml (4 oz.) of Additive Friction Modifier XL-3 or equivalent
meeting Ford specification EST-M2C118-A for complete refill of
Traction-Lok rear axles.
3
Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. MERCON
and MERCON V are not interchangeable. DO NOT
mix MERCON
and MERCON V. Refer to your scheduled maintenance
information to determine the correct service interval.
ENGINE DATA
Engine
4.6L V8 engine
Cubic inches
281
Required fuel
87 octane
Firing order
1-3-7-2-6-5-4-8
Ignition system
Coil on plug
Spark plug gap
0.052–0.056 inch (1.32–1.42mm)
Compression ratio
9.4:1
VEHICLE DIMENSIONS (AT CURB MASS)
Vehicle dimensions
Inches (mm)
(1) Overall length
213.1 (5413)/219.1 (5566)
a
(2) Overall width
78.3 (1990)
(3) Overall height
58.3 (1481)/58.9 (1495)
a
(4) Wheelbase
114.6 (2911)/120.7 (3067)
a
(5) Track - Front
63.4 (1610)
(5) Track - Rear
65.6 (1666)
a
Denotes long wheel base
2005 Crown Victoria (cro)
Owners Guide (post-2002-fmt)
USA_English (fus)
Maintenance and Specifications
245