FRIGIDAIRE FSEC/FSGC748GF - Manual (Page 2)

P/N 131713000 (9803)
• When the Cycle Signal is on, it will sound briefly
every 5 minutes as a reminder to remove the load.
Energy Saving Tips
• Keep the lint screen clean and exhaust the dryer
correctly.
• Sort laundry properly and select proper temperature
and cycle settings. Choose an automatic dry cycle
whenever possible for accurate drying time.
• Dry only full loads. Single items and small loads usually
take longer to dry.
• Avoid overloading, adding wet items to a partially dry
load, and overdrying.
• Dry one load after another to take advantage of a
warm dryer.
• Opening the door needlessly causes warm air to
escape, which prolongs drying time.
• If possible, use the dryer on low humidity days.
• Install the dryer in an area where the room temperature
is at least 45°F (7°C).
• Unheated tumbling continues during the Press Saver
for 22 minutes to help reduce wrinkling.
• When the Cycle Signal is on, it will sound briefly
every 5 minutes as a reminder to remove the load.
Timed Dry Regular Cycle
This cycle provides up to 65 minutes of drying time at the
temperature selection of your choice.
Automatic Perm Press Cycle
This cycle is best for permanent press items. Drying time
is determined automatically at the temperature selection
of your choice.
• Medium heat is suggested for permanent press items.
• Set cycle selector on NORMAL DRY.
• For items requiring more drying time, set cycle selector
on MORE.
• For items requiring less drying time, set cycle selector
on LESS.
• If the dried load cannot be removed promptly, the
cycle selector will advance to the Press Saver setting.
• Unheated tumbling continues during the Press Saver
for 22 minutes to help reduce wrinkling.
Cycle Selection
(continued)
Automatic Regular Cycle
This cycle is best for cotton items that can be tumble
dried. Drying time is determined automatically at the
temperature selection of your choice.
• Set cycle selector on NORMAL DRY.
• For items requiring more drying time, set cycle selector
on MORE.
• For items requiring less drying time, set cycle selector
on LESS.
Automatic Delicate Cycle
This cycle is best for knit and delicate items. Drying time
is determined automatically at the temperature selection
of your choice.
• Low heat is suggested for knit and delicate items.
• Set cycle selector on NORMAL DRY.
• For items requiring more drying time, set cycle selector
on MORE.
• For items requiring less drying time, set cycle selector
on LESS.
• If the dried load cannot be removed promptly, the
cycle selector will advance to the Press Saver setting.
NORMAL DRY
NORMAL
DRY
NORMAL
DRY
TIMED DRY
REGULAR AUTOMATIC
DELICATE MOISTURE SENSOR
INTERIOR DRUM LIGHT
TIMED DRY
REGULAR
AUTOMATIC
DELICATE
AUTOMATIC
PERM PRESS
AUTOMATIC
REGULAR