FRIGIDAIRE 316417013 - Manual (Page 18)

18
To Remove the Bake-n-Warm™
Double Oven Drawer & Replace
the Oven Light:
1. Before drawer removal, be sure to turn
OFF the Bake-n-Warm™ Double Oven
and let the drawer area cool completely.
2. Pull the drawer away from the oven.
Using a phillips-head screwdriver
remove the two drawer screws from
the insides of the front oven drawer
compartment (See Fig. 1).
3. With one hand hold the drawer front in
place. Use your other hand to pull the
glide away from the oven (See Fig. 2)
until the glide hook disengages (See
Fig. 3).
4. Repeat from step 3 above for the other
side of the drawer.
5. With BOTH glide hooks disengaged,
carefully lift the drawer up and away
from the oven. Push both drawer glides
into lower oven cavity.
6. Replace the lower oven light with a 40
Watt Appliance light bulb (Refer to
Fig.5).
Bake-n-Warm™ Double Oven
To replace Bake-n-Warm™ Double Oven Drawer:
1. Pull both drawer glides and fully extend outward from lower
oven cavity.
2. Carefully rest the drawer on top of both glides.
3. Adjust the drawer position on top of the rails until both of the
drawer side slots are correctly engaged with the glide hooks
(See Fig. 4).
4. Pull the drawer forward to line up the drawer with both screw
holes in the glides. Using a phillips-head screwdriver replace
the two screws removed from the inner drawer sides.
5. Replace drawer rack if removed.
6. Close lower oven drawer.
Fig. 1
Fig. 2
Glide Hook Disengaged
Fig. 3
Glide Hook Engaged
Fig. 4
Fig. 5
The Bake-n-Warm™ Double Oven light operates with the upper
oven light and automatically turns ON when the upper oven door
is opened. If equipped, the Bake-n-Warm™ Double Oven light may
also be manually operated by pressing the pad.
Bake-n-Warm™ Double Oven Light Operation (some models):
Be sure the range is unplugged and all parts are
COOL before replacing oven light. Wear a leather-faced glove for
protection against possible broken glass.