Solutions to common dishwashing problems – FRIGIDAIRE 500 User Manual

Page 12

Advertising
background image

12

Solutions to Common Dishwashing Problems

Glassware/Flatware Spotted or
Cloudy

• Check water hardness. For extremely hard

water, it may be necessary to install a water

softener. (See Detergent Chart.)

• Water temperature may be low. Avoid

extremely low or high temperatures. (See

Factors Affecting Performance.)

• Avoid overloading and improper loading.

(See Preparing and Loading Dishes.)

• Use fresh detergent. Old detergent is

ineffective.

• Make sure rinse aid dispenser is filled.
• Check to see that proper amount of

detergent is being used for cycle selected.

Also, check phosphate level. (See

Detergent Dispenser.)

• Home water pressure may be too low—it

should be 20 to 120 pounds per square

inch (psi).

Dishware Chipped

• Load with care and do not overload. (See

Preparing and Loading Dishes.)

• Place delicate items in top rack.
• Place glasses securely against pins and

not over pins.

• Load items so they are secure and don’t jar

loose when moving racks in and out. Move

racks in and out slowly.

• Make sure tall glasses and stemware will

clear top of tub when rack is pushed in.

• Fine antique china and crystal should be

hand-washed.

Before calling for service, review this list. It

may save you both time and expense. This

list includes common experiences that are

not the result of defective workmanship or
material in your dishwasher.

Food Soils Left on Dishes

• Choose another cycle for longer washing

time.

• Check rack loading section for proper

loading—avoid nesting items.

• Home water pressure may be too low—

should be 20 to 120 pounds per square

inch (psi).

• Check incoming water temperature. It

should be at least 120°F (49°C). (See

Factors Affecting Performance.)

• Select HI-TEMP WASH option.
• Check water hardness. For extremely hard

water, it may be necessary to install a water

softener. (See Detergent Chart.)

• Use fresh detergent.
• Check to make sure funnel in top rack is not

blocked.

• Make sure items are not blocking the spray

arms, preventing them from rotating.

Dishes not Dry

• Select heat dry option.
• Make sure the rinse aid dispenser is filled.
• Increase the amount of rinse aid. (See

Rinse Aid.)

• Check the incoming water temperature. Be

sure it is at least 120°F (49°C).

• Check for proper loading—avoid nesting

items.

• Plastic items may need to be towel dried.
• Cups with a concave bottom will collect

water.

Advertising