GE DCD330G - Manual (Page 17)

17
Countdown Display (DCD models only)
The countdown display shows the remaining
operating time as well as the current drying cycle.
The display board is configured for a 45-minute dry
time at the factory to correspond with the 45-minute
timer cam pre-installed in the coin box. If the timer
cam is modified for another operating duration, the
dipswitches on the display board should be set as
follows:
NOTE: This display does not accumulate time. See the following examples of display possibilities.
DIP SWITCH NUMBERS
DRYING TIME (minutes) 1 2
45 1 1
60 1 0
90 0 1
120 0 0
Customer Service
Care and Cleaning
Safety Instructions
Installation Instructions
DIPSWITCH SETTING (min) COIN SLIDE ACTUATIONS DISPLAY READING (min)
45 1 45 to 0, then blank
45 2 45 to 1, then 1 for next 45 min.,
then 0 and blank
120 1 99 for 21 minutes, then 98 to 0,
then blank