4 configuration, 1 configuration methods, 1 configuration via serial connection – GE Industrial Solutions Digital Energy SNMP_WEB ADAPTER User Manual
Page 19: Configuration, Configuration methods, Configuration via serial connection
4 CONFIGURATION
4.1 CONFIGURATION METHODS
The SNMP/Web plug-in adapters can be configured using different interfaces.
4.1.1 Configuration via serial connection
•
Connect the SNMP adapter to a computer using a standard 1:1 serial communication cable.
•
Run a terminal simulator (e.g. HyperTerminal on a PC running Windows)
•
Configure the terminal simulator as follows:
115,200bps, 8 data bits, 1 stop bit,
parity
none, flow
control
none
Terminal emulation VT-100
•
Establish the connection and press <enter>
•
The default username (login) and password are ge and ge
•
A command-line configuration interface is entered. Type menu to enter the quick network
configuration menu:
Modifications reserved
Page 19/24
ISG_CNT_SNM_BAS_CRD_1GB_V012.doc
Installation Guide SNMP/Web Adapter