GE Industrial Solutions Digital Energy SNMP_WEB ADAPTER - Manual (Page 5)

1 SAFETY RULES
With this document, GE gives to the user all the necessary information about the correct installation of
the SNMP/Web adapters.
Please read carefully this Installation Manual before installing or operating the adapters.
We recommend that this manual be kept next to the UPS for future references.
If any problems are encountered with the procedures contained in this manual, please contact the
nearest Service Centre before you proceed.
For more information on the UPS system, please refer to the applicable Installation and User Manual.
All maintenance and service work should be performed by qualified service personnel only.
The KNOWLEDGE of (and FULL compliance to) the safety instructions and
the warning contained in this manual are
THE ONLY CONDITION
to avoid any dangerous situations during installation, operation,
maintenance work, and to preserve the maximum reliability of the UPS
system.
NOTE !
While every care has been taken to ensure the completeness
and accuracy of this manual, GE assumes no responsibility or
liability for any losses or damages resulting from the use of
the information contained in this document.
GE
Refuses any responsibility in case of non-observance,
unauthorised alterations or improper use of the
delivered equipment.
Modifications reserved Page 5/24
ISG_CNT_SNM_BAS_CRD_1GB_V012.doc Installation Guide SNMP/Web Adapter