Helpful information, Specialized fabric guide, Specialty care guide – GE DCXR453 User Manual

Page 10

Advertising
background image

11

Helpful Information

Specialty Care Guide

Pillows

Mend any holes or weak seams where feather or filling could
escape. Dry only one pillow at a time. Stop dryer occasionally and
shake pillow, redistributing filling for even drying. Check pillow
at the end of drying time. If it is not completely dry, reset dryer
for more drying time.
Dry on low heat only.

CAUTION:

Do not dry pillows containing foam rubber.

Blankets

Add 2–4 dry towels and one blanket and set timer for 20–25 minutes.
Dry only one blanket at a time. Do not set control for more than 25
minutes. At the end of drying cycle block the blanket back to its
original shape. Allow blanket to dry thoroughly before storing.

Cotton

Use a medium heat drying setting.

Synthetic

Use a low heat drying setting.

Down

Use a low heat drying setting.

Extra Large Items

Use a low heat drying setting.
Set dryer for 20 minutes. When time is up, check and redistribute
load. Reset dryer for 15 minutes. When time is up, check and
redistribute load. Reset timer for 5 minute intervals. Check after
each 5 minutes to ensure articles do not fill dryer drum. Large, wet
articles should have ample room in the dryer, but as they dry and
fluff up they may not have room to tumble.

CAUTION:

Items without room to tumble may block air flow and

could result in scorched items. Dry mattress pads separately. Use
a low heat drying setting.

Item

Suggested Care

Always follow Fabric Manufacturer’s Care Label or instructions when laundering.
Otherwise use the information below as a general guide.

(Includes
comforters
blankets and
mattress pads.)

Advertising
This manual is related to the following products: