Garmin GPS 152H - Manual (Page 12)

 GPS 152H Owner’s Manual
Navigation
4. Highlight the waypoint that is before the waypoint you want to
add, and press Menu .
5. Select Insert Waypoint .
6. Select a waypoint from the By Name list or the Nearest list.
7. Select OK .
8. Continue to add waypoints, if necessary.
9. Press
Quit to save the route.
To remove a waypoint on a route:
1. From any Main page, press Menu twice.
2. Highlight Rte .
3. Select the route you want to edit.
4. Highlight the waypoint you want to delete, and press
Menu .
5. Select Remove Waypoint .
Note: The waypoint is removed from the route. It is not deleted.
To invert an existing route:
1. From any Main page, press Menu twice.
2. Highlight Rte .
3. Select the route you want to invert.
4. Highlight any waypoint, and press
Menu .
5. Select Invert .
To delete a route:
1. From any Main page, press Menu twice.
2. Highlight Rte .
3. Highlight the route you want to delete, and press Menu .
4. Select Delete Route .
To delete all saved routes:
1. From any Main page, press Menu twice.
2. Highlight Rte , and press Menu .
3. Select Delete All .
Using Tracks
A track is a recording of your path. The track currently being
recorded is the active track. An active track can be saved. To adjust
track settings, see page 12 .
Turning Tracks On or Off
1. From any Main page, press Menu twice.
2. Highlight Trk > Active .
3. Select Record Mode .
Off—does not record a track log.
Fill—record a track log until the track memory is full.
Wrap—continuously records a track log, replacing the oldest
track data with new data.
•
•
•