Care and cleaning 22,24, Light; bulb replacement 9,22, Care and cleaning – GE JKP27J User Manual
Page 22: Porcelain enamel and painted surfaces, Lamp replacement
(See Cleaning Guide on page 24.)
Proper care and cleaning are
important so your oven(s) will give
you efficient and satisfactory
service. Follow these directions
carefully in caring for your oven(s)
to assure safe and proper
maintenance.
Porcelain Enamel and
Painted Surfaces
Any acid foods spilled (such as
fruit juices, tomato or vinegar)
should be wiped up immediately.
See guide for cleaning directions.
CAUTION: Before replacing
your oven lamp bulb, disconnect
the electric power for your oven
at the main fuse or circuit
breaker panel. Be sure to let the
lamp cover and bulb cool completely
before removing or replacing them.
The oven
is covered
with a glass
cover which
is held in place with a bail-shaped
wire.
1.
REMOVE, hold hand
under cover so it doesn’t fall when
released. With fingers of same
hand, firmly push back wire bail
until it clears cover. Lift off cover.
DO NOT REMOVE ANY
SCREWS TO REMOVE COVER.
2. Replace lamp with 40-watt
home appliance bulb.
3.
REPLACE cover, place it
into groove of lamp receptacle. Pull
wire bail forward to center of cover
until it snaps into place. When in
place, wire holds cover firmly. Be
certain wire bail is in depression in
center of cover.
4. Connect electric power to oven.
22