Control settings 9, Shelves 9, Shelves – GE JKP27J User Manual

Page 9: Control settings, Light; bulb replacement, Using your oven, Before using your oven, Oven controls, Oven light, Oven interior shelves

Advertising
background image

Using Your Oven

Before Using Your Oven

1. Look at the controls. Be sure

you understand how to set them
properly. Read over the directions
for the Automatic Oven Timer so
you understand its use with the
controls.

2. Check oven interior. Look at
the shelves. Take a practice run at
removing and replacing them properly,

to give sure, sturdy support.

3. Read over information and tips
that follow.

4. Keep this book handy so you can
refer to it, especially during the
first weeks of getting acquainted
with your oven.

Oven Controls

PREHEATING the oven, even to
high temperature settings, is speedy
—rarely more than about 10 minutes.

Preheat the oven only when
necessary. Most foods will cook
satisfactorily without preheating.
If you find preheating is necessary,
keep an eye on the indicator

Oven Light

The light comes on automatically

when the door is opened. On models
with oven window use switch to
turn light on and off when door
is closed.

Switch is located on front of door

and-put

in the oven

on some models, on control panel

after light goes out.

on other models.

Oven Interior Shelves

The shelves are designed with
stop-locks so that when placed
correctly on the shelf supports,
they

will stop before coming

completely from the oven, and (b)
will not tilt when removing food
from or placing food on them.

TO REMOVE shelves from the
oven, lift

up

rear of shelf, pull

forward

stop-locks along top

of shelf supports. Be certain that
shelf is cool before touching.

TO REPLACE shelves in oven,
insert shelf with stop-locks resting
on shelf supports. Push shelf toward
rear of oven; it will fall into place.
When shelf is in proper position,

The controls for the oven(s) are

stop-locks on shelf

run under

marked OVEN SET and OVEN

shelf support when shelf is pulled

TEMP. OVEN SET has

for

forward.

BAKE, TIME BAKE (on

so

equipped), BROIL, CLEAN and OFF.

Shelf Positions

When you turn the knob to the desired
setting, the proper heating units are

then activated for that operation.

OVEN TEMP maintains the
temperature you set, from WARM

to BROIL

and

also at CLEAN

).

The Oven Cycling Light glows
until the oven reaches your selected
temperature, then goes off and on with
the oven unit(s) during cooking.

The oven has four shelf supports
marked A (bottom), B, C and D
(top). Shelf positions for cooking
food are suggested on Baking,
Roasting and Broiling pages.

9

Advertising
This manual is related to the following products: