Controls features, About controls features – GE WHSB8000 User Manual

Page 10

Advertising
background image

Operating Instructions

Safety Instructions

Consumer Support

Tr

oubleshooting T

ips

About controls features.

10

START

After you have selected a new cycle, press once to start the cycle.

Press twice to select the last cycle used and start the washer.

If the washer is running, press once to interrupt the cycle; press again to continue
the cycle.

STOP

This pad should not be used to interrupt or pause a cycle.

Pressing this pad will cancel the current settings and the settings will be lost.

Estimated Time Remaining

Displays the approximate time remaining until the end of the cycle.

If the estimated time remaining is more than 60 minutes, “1H” will flash in the
display, followed by the additional remaining minutes. When the time remaining is
less than 60 minutes, the timer will count down.

Cycle time is affected by how long it takes the washer to fill. This depends on the
water pressure in your home. The “smart” timer “learns” the amount of time it
takes to fill your washer and adjusts the total time accordingly.

NOTE: If PRESOAK is selected and a follow up wash cycle is not chosen, two dashes
will come up in the display.

E

ST.

T

IME

R

EMAINING

Spot Spray

Provides a short spray of water to allow you to dampen clothing when you pretreat stains.

Open the washer lid.

Press the SPOT SPRAY button. (You will see a short stream of water.)

Dampen your soiled garment with the SPOT SPRAY option and rub your favorite
pretreatment product into soiled area.

NOTE: The SPOT SPRAY option will not work if

the washer lid is down

the washer tub is filling

the water has already reached the level you selected.

3

2

1

The Bleach Signal is a reminder signal that can be turned on to remind you to add bleach at
the proper time in the wash cycle. Adding detergent and bleach at the same time reduces the
effectiveness of both the enzymes in the detergent and the chlorine in the bleach. By adding
bleach later in the wash cycle, you allow the detergent’s enzymes to remove dirt and stains first,
and then provide a more effective dose of liquid bleach to whiten and sanitize your clothes.

BLEACH SIGNAL (on some models)

Advertising
This manual is related to the following products: