GE PGS975BEM User Manual

Pgs975bem/wem, Ge profile, 30" slide-in gas range

Advertising
background image

For answers to your Monogram,

®

GE Profile

or

GE

®

appliance questions, visit our website at

ge.com or call GE Answer Center

®

service,

800.626.2000.

Specification Revised 5/07

230142

You must use the rear filler strip kit shipped with

the range or the optional accessory backguard

when installing these ranges
Note:
Cabinets installed adjacent to slide-in
ranges must have an adhesion spec of at least
194° temperature rating.
Optional Kits for Slide-In Gas Ranges:
(Available at additional cost)
Lower/Side Trim Kits
JXS56WW - Lower Trim Kit (White)
JXS56BB - Lower Trim Kit (Black)
Accessory Backguards
JXS32BB - Black Accessory Backguard
JXS37BB - Black Glass Accessory Backguard
JXS32WW - White Accessory Backguard
JXS37WW - White Glass Accessory Backguard
Installation Information: Before installing, consult
installation instructions packed with product for
current dimensional data.

All GE ranges are equipped with

an Anti-Tip device. The installation

of this device is an important,

required step in the installation

of the range.

Dimensions and Installation Information (in inches)

PGS975BEM/WEM

GE Profile

30" Slide-In Gas Range

28-1/4*

36

Maintain

at least 6"

from nearest

combustible

surface.

Acceptable

Electrical

Outlet Area

30" Slide-In Range

Dimensions (in inches)

45-1/8

2-1/4

5

6

4-1/2

30

30" Min.

15" Min.

6

30" Slide-in Elec. Range

Aug. 8, 2003 -km

23-3/16

30

30

If you are NOT using the

Filler strip or Backguard:

If you are using the

Filler strip or Backguard:

25

*Wall to front of

closed door handle

on model JSP34.

28" on models

JSP26/JSS26/16.

Note: Range may be placed with 0" clearance (flush) at the back wall and side walls

below countertop if the range side trims above the countertop extend beyond the cabinet

fronts at least 1/4". (Self-clean models only.) Maintain at least 6" distance from nearest

combustible surface.

30

31-1/2

28-1/4*

36

Maintain

at least 6"

from nearest

combustible

surface.

Acceptable

Electrical

Outlet Area

30" Slide-In Range

Dimensions (in inches)

45-1/8

2-1/4

5

6

4-1/2

30

30" Min.

15" Min.

6

30" Slide-in Elec. Range

Aug. 8, 2003 -km

23-3/16

30

30

If you are NOT using the

Filler strip or Backguard:

If you are using the

Filler strip or Backguard:

25

*Wall to front of

closed door handle

on model JSP34.

28" on models

JSP26/JSS26/16.

Note: Range may be placed with 0" clearance (flush) at the back wall and side walls

below countertop if the range side trims above the countertop extend beyond the cabinet

fronts at least 1/4". (Self-clean models only.) Maintain at least 6" distance from nearest

combustible surface.

30

31-1/2

2-7/8"

To Front

Surface Of

Countertop

20-5/8"

Door Clearance

From Front

Surface of

Countertop

31-1/4

30

A*

Accessory

Backguard

36

2"

(Grates)

24

Acceptable

Gas Line &

Electrical

Outlet Area

Max. depth of

cord, plug,

receptacle box

& gas hookup

3-1/2" to prevent

interference

with drawer

30" Min.

Shave Raised Edge To Clear

31-1/8 Wide Control Panel

30" Min. to

unprotected

cabinet from

countertop

23-3/16

18" Min.

13" Max.

3

29-15/16" Min.

30-1/16" Max.

25

9/16

7

12

15

*A – JXS37 is 5-1/4" and JXS32 is 4"

27-1/2**

44-3/4

(excluding handle)

**Total depth from wall to

front of closed oven door

including handle is 30-1/2.

B is 9-1/2" from walls on either side for P2S975, PGS975

and PGS908 and 6” for PGS968

B

35-7/8"–38"

from floor to

countertop

Counter Cutout Dimensions (in inches)

2-7/8"

To Front

Surface Of

Countertop

20-5/8"

Door Clearance

From Front

Surface of

Countertop

31-1/4

30

A*

Accessory

Backguard

36

2"

(Grates)

24

Acceptable

Gas Line &

Electrical

Outlet Area

Max. depth of

cord, plug,

receptacle box

& gas hookup

3-1/2" to prevent

interference

with drawer

30" Min.

Shave Raised Edge To Clear

31-1/8 Wide Control Panel

30" Min. to

unprotected

cabinet from

countertop

23-3/16

18" Min.

13" Max.

3

29-15/16" Min.

30-1/16" Max.

25

9/16

7

12

15

*A – JXS37 is 5-1/4" and JXS32 is 4"

27-1/2**

44-3/4

(excluding handle)

**Total depth from wall to

front of closed oven door

including handle is 30-1/2.

B is 9-1/2" from walls on either side for P2S975, PGS975

and PGS908 and 6” for PGS968

B

35-7/8"–38"

from floor to

countertop

Advertising
This manual is related to the following products: