GE Profile JBP95KF User Manual

Jbp95bf/kf/sf/tf–ge profile, 30" free-standing cleandesign electric range

Advertising
background image

Specification Created 12/01

TM

JBP95BF/KF/SF/TF–GE Profile

30" Free-Standing CleanDesign Electric Range

Dimensions and Installation Information (in inches)

*Dimension from wall to front of closed oven door handle is 27-3/8”.

30

25

2-1/2

7-1/2

29-7/8

25-3/8*

47-5/8

46-1/2

2-1/2

Acceptable electrical

outlet area

Preferred electrical

outlet area

Roughed-in dimensions

R

Listed by
Underwriters
Laboratories

All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.

For answers to your Monogram,

®

GE Profile

or

GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center

®

service, 800.626.2000.

Receptacle Locations: For 30" Free-Standing Ranges locally approved flexible service cord or

conduit must be used because terminals are not accessible after range installation. See shaded
area drawing for location of electrical outlet box. Recommended outlet locations allow range to
be installed directly against wall.

Note: Conforms to U.L. requirements for 0" spacing for adjacent walls below countertops.
To reduce possibility of scorching of walls, it is recommended a minimum of 1-1/2" spacing be
allowed from adjacent side walls to allow for possible extended, high-heat, no-load heating
element operation.

Installation Information: Before installing, consult installation instructions packed with product
for current dimensional data.

KW Rating

240V

12.4

208V

9.3

Advertising